Double Column Fullyautomatic Bandsaw Machines

Product Details:

Product Details:

Product Details:

We are providing UEDC Double Column Heavy Duty Metal Cutting Bandsaw Machines.

Saw Head: Saw head unit is supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bushes. The blade is guided by bearings & carbide wear pads. The blade can be tightened and released hydraulically. The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The saw is driven by sufficient drive power to cut material.

Auto Work HeightControl:The quick approach arm eliminated the need for the operator to manually adjust the blade height to accommodate different sizes of the material. The blade will approach the material rapidly until the arm make contact, when the saw starts cutting.

Blade Guides: The guide ensures accurate cutting & long blade life. They are factory set. It consists of spring loaded, self-adjusting carbide faced inserts. Adjustment screws are provided to allow easy blade changing. The blade is guided by roller bearings & carbide wear pads.

Saw Feed: Saw head up & down motion is controlled by hydraulic cylinder and regulated by a pressure compensated flow control valve.

Job Clamping: This is controlled by hydraulic cylinder & valves. The jaws of the front & rear vices are in one straight line and perpendicular to the blade. The movement of jaws of both the vices are controlled by hydraulic cylinder & valves. 

Split Front Vice: This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces. 

Auto Length Indexing & Length Counter: The automatic feeding of job is also done by indexing. The feed length can set by means of screw & digital counter assembly with length accuracy of +/- 0.2mm. The hand wheel is provided to set the cutting length upto 400mm which can be read on digital counter in increment of 0.1mm. The multiple stroke makes it possible to multiply the number of index cycles when pieces longer than 400mm are required. ( Available in DCA Automatic machines ).

Nesting Fixture / Bundle Clamping: A nesting fixture set consists of hydraulically operated vertical clamps which are mounted on the rear and front vices. This makes it possible to cut multiple pieces at a time.

Powered Blade Cleaning Brush: The power driven brush keeps the blade teeth free from chips for smoother cutting & increase the performance and life of the blade.
 

Standard Accessories

• Hydraulic Band Tension
• Hydraulic Split Front Vice with Full Stroke Clamping
• Variable Hydraulic Cutting Feed Controller
• Auto Saw Frame Height Adjustment
• Roller Bearing Carbide Blade Guide
• Complete Hydraulic System
• Complete Coolant System
• Complete Electrical System
• Power Driven Chip Removal Wire Brush
• Digital Band Speed Indicator With Blade Stalling and Breakage Shut Off
• Step Pulley With V-Belt
• Bi-metal Bandsaw Blade 1 Nos.

 

Additional Accessories Only For Fully Automatic Models

• PLC Based Electric Panel Board
• Hydraulic Shuttle Vice with 1.5MT Roller Table
• Multiple Indexing
• Digital Piece Counter with 0.2mm Accuracy

 

Extra Accessories:

• Variable Speed D.C./A.C. Drive
• Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System
• Job Roller Stand

In order to cater to the numerous necessities of the patrons, we have been able to provide a qualitative range of Double Column Heavy Duty Metal Cutting Bandsaw Machines.

We are a renowned organisation in the industry to provide our patrons with the best quality range of Double Column Heavy Duty Metal Cutting Bandsaw Machines.

Owing to the consistent efforts of our dedicated team of professionals, we have been constantly engaged in offering the best quality array of Double Column Bandsaw Machine.