Owing to the years of industrial experience, we have been able to provide our valued clients with a wide range of Semi Automatic Metal Cutting Bandsaw Machines.
Feeding of the job is done manually. Clamping & Declamping is Automatic. An auto switch is to be pressed in auto mode of machine. Machine automatically clamps the job. Swiveling arm starts running down on gravitational force for cutting operation. After cutting arm automatically goes up. Machine automatically declamps the job. An auto switch is again pressed and the cycle repeats. Feeding knob is given to get required feed of the arm coming down. Get the required speed of the blade by adjusting v-belt depending upon the material to be cut.
"Universal" Hinged TypeLow Cost Semiautomatic High Speed Bandsaw Machines
Complete Hydraulic Power System
Complete Electronic Control System
Bimetal Bandsaw Blades
Bimetal Bandsaw Blades
Job Roller Stand
(Length 1 Meter)
Swivel Vice Set for
Feeding of Job:ManualClamping Declamping of Job:AutomaticUpifting of Arm:Automatic
For optimum performance of the Bandsaw machine, Bandsaw blade should be selected as per the geometry and grade of the material.
Please consult Blade Manufacturer or refer our instruction manual.
All above information is subject to change arising out of continuous product improvement.
In order to cater the diversified demands of our clients, we have been able to provide a unique range of UESA - 2 HS Semi Automatic Metal Cutting Bandsaw Machines.
In order to retain our goodwill in this industry, we are providing a qualitative array of UESA - 3 HS Semi Automatic Metal Cutting Bandsaw Machines.
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials. Advantages include uniform cutting action as a result of an evenly distributed tooth load, and the ability to cut irregular or curved shapes like a jigsaw. The minimum radius of a curve is determined by the width of the band and its kerf. Most bandsaws have two wheels rotating in the same plane, one of which is powered, although some may have three or four to distribute the load. The blade itself can come in a variety of sizes and tooth pitches (teeth per inch, or TPI), which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.
Keeping in mind the vast necessities of the patrons, we are engaged in providing a wide range of Semi Automatic Metal Cutting Bandsaw Machines.